5 Stone Cold Facts About Replacing Tile Floor
When it comes to installing new flooring there are a few things to remember. Here are 5 important tidbits to know about replacing tile floor.
Over time water and traffic can damage the tiles in your bathroom causing them to crack and the grout to loosen. When that happens, more damage can occurquickly as moisture begins to get into the subflooring.
In order to install a new floor, the old one must be broken up and removed entirely. Then you need to examine the subfloor to see if it needs to be replaced as well.
Once you are sure everything damaged has been removed you can begin replacing tile floor. Read on for facts to give you an idea of what the process will be like before you get started.
1. Sometimes You Can Leave the Original Flooring in Place
Removing your existing tile will not be easy. You will have to work your way across the room slowly or hire someone for labor. But it's a good idea because then you will be able to examine the subfloor underneath before laying something new down.
However, keeping it covered can save you a lot of time and money and if you are sure your subfloor is fine then it's not a bad idea.
2. Install a Water-Resistant Subfloor When Replacing Tile Floor
Before starting on your new floor installation, you will most likely need to put a new substrate down to go beneath your tile. For the best results, make sure you choose something that is completely waterproof.
Or if your bathroom doesn't get a lot of use and you don't have a tub or shower in it, you can consider using plywood.
3. Lay Out Tile Patterns in Advance to Be Sure it Will Fit
When you choose a tile pattern, you need to be sure that it will fit and look good in a bathroom of your size. Try to lay down the purposed pattern in advance to see what it will look like.
It will also help give you an idea of where cuts should be placed like at the edge of a room or opposite the shower door. By laying out the pattern now, you will be able to know exactly how many tiles you need and what cuts you need to make.
4. Allow Your Tiles to Dry in Place Before Grouting
Before you grout your tiles, you need to be sure that they have a full 24 hours to dry in place. This is to be sure that your tiles won't become crooked when you put weight on them.
5. Allow Grout to Dry for 24 Hours Before Walking on It
You will also need to let your grout dry in place for 24-hours before you walk on it. However, it won't be fully dryat this time. It will fully dry over the next two weeks.
Where to Purchase Flooring
Now that you have some more information about what it takes for replacing tile floor, you can consider your own bathroom and decide what will be the best route for your project.
We would love to help you create your vision. Visit our Flooring Store located at 615 W Deer Valley Rd, Suite 118 in Phoenix and consult with one of our flooring experts or request a free in-home estimate today. Our service areas include Phoenix , Scottsdale, Glendale , Peoria, Paradise Valley, Chandler, Mesa, Tempe, Gilbert, Surprise, Avondale, Buckeye, Goodyear, Tolleson, Cave Creek, Anthem, Fountain Hills, and the surrounding Phoenix Arizona areas.
